Cartridge bearing, axle & cassette tools for bicycle hubs

We do not have an on-line shopping cart at this time. Please call us: (503) 480-2001 or email: sscycleworks@comcast.net

Cartridge bearing & cassette tools for bicycle hubs on this page: Enduro bearing puller | Park Tool AV-1 Axle Vise | Mavic Hub Bearing Drift Tool | Mavic Hub Punch Tool | Cyclus Shimano SIS/Hyperglide Cassette Lockring Removal Tool | Pamir Engieering HG Cassette Lockring Wrench | J.A. Stein Shimano cassette lockring mini- tool | Part Tools Shimano cassette lockring tool with guide | Park FR-5 Shimano lockring remover

---

Enduro bearing puller for cartridge bearings, 8 - 25mm ID. New, $10.00

Part# 16080

• Enduro part# BBT-105
• Installs and seats against the inner race of the cartridge bearing for removal
• We have one in stock.

• We have used it to remove dustcaps from hubs. It pulls them evenly without distorting them, unlike using a screwdriver. We have pictures of using one to remove a dustcap below the picture of the tool, along with directions.

Removing a hub dustcap with this tool:

One screwdriver passes through the hub and pushes against the puller, while another screwdriver wedges the ends of the puller firmly against the inside of the cap. We manage to keep this together while banging the end of the pushing screwdriver against a firm surface.

Of course re-setting the dustcaps is another story!

Note: The pictures below are of our own tool, which we have used for years. We like it so much that when we finally broke it, we brazed it back together.

The set-up

And it is done and the dust cover remains undistorted.

---

Park Tool AV-1 Axle Vise. New, $18.00/each

Part# 16232

This makes holding a hub by the axle a simple task.

Side view

---

Mavic Hub Bearing Drift Tool Ref 6704. New, $75.00/each

---

Mavic Hub Punch Tool, Ref 6703. New, $75.00/each

---

Cyclus Shimano SIS/Hyperglide Cassette Lockring Removal Tool. New, $15.00/each

• Hyperglide splined lockring tools can also be used to remove Shimano and Sachs/SRAM conventional freewheels.

Here's the SIS side

Side view

Close-up of the SIS side

And here's the HG side.

---

Pamir Engineering HG Cassette Lockring Wrench. Used, $38.00/each

This tool should give good leverage.

Close-up

Here's the other side of the remover.

---

J.A. Stein Shimano cassette lockring mini-tool. New, $38.00

The Stein Mini Cassette Lock will remove or install a Shimano lockring without the need of a wrench.

Here is a PDF of the manufacturer's directions.

Here it is

Simple and effective

If you couldn't download the directions from the link above, here they are.

---

Park Tool Shimano cassette lockring tool with guide. New, $12.00/each

Part# 16002

• Park Tool part# FR- 5.2G
• Will also work on SRAM, SunRace, SunTour cassette lockrings & Shimano disc brake lockrings

Still new, in its factory package

And here are the directions.

---

Park FR-5 Shimano Cassette Lockring Remover. Very lightly used, if at all, $10.00/each

The working end of the tool.

Here's the other end of the tool