.833", 1", 1 1/8" & 1 1/4" Quill stems from unknown makers

On this page:
.833"(21.1mm) diameter: 9cm/30-degree rise

1" diameter: 8cm/25-degree rise | 8cm/30-degree rise, alloy | 8cm/30-degree rise, steel | 9cm/30-degree rise | 9cm/60-degree rise | 10cm | 10.5cm/45-degree rise | 10.5cm/40-degree rise, CroMoly | 11cm/40-degree rise, CroMoly | 12cm/15-degree rise | 12cm/40-degree rise, CroMoly | 12cm/40-degree rise | 13.5cm/15-degree rise | 13.5cm/20-degree rise, Japan-made

1 1/8" Diameter: 15cm/20-degree rise

1 1/4" diameter: 13cm/20-degree rise

We don't have an on-line shopping cart. If you see something that interests you or if you have a question, please call us at (503) 480-2001 or email: sscycleworks@comcast.net

There are fine stems that have no indication of the company that made them. This is usually because the parts are made for a bike company that wants no branding on their parts.

---

9cm, .833" (21.1mm) diameter quill stem with a 30-degree rise for a 25.4mm bar. Used, $25.00/each

Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 14cm.

This quill, at .833" is slightly smaller than 1" and is for many older American bikes and some Japanese-made bikes as well.

Here's the other side of this stem.

From the back

And here's the front.

---

8cm, 1" diameter quill stem with 25-degree rise for a 25.4mm diameter bar. New, $30.00/each

Part# 31173

Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 8cm.

This stem has a front brake cable housing stop.

Here's the other side of the stem.

Top and back of the stem

Front and underside of the stem.

---

8cm, 1" diameter alloy quill stem with a 30-degree rise for a 25.4mm diameter bar. Used, $30.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 10cm.

Side view

Here's the other side of the stem.

Back and top of the stem. This stem can be the front brake cable housing stop. Note the hole in the horizontal section of the stem.

The front of the stem.

---

8cm CroMoly steel, 1" diameter quill stem with a 30-degree rise for a 25.4mm diameter bar. New, $30.00/each

Part# 31163

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 6cm.

Side view. This stem can also act as the front brake's cable housing stop

Here's the stem flipped over to show its other side

The back and top of the stem

Here's the stem's front and underside.

---

9cm 4-bolt mountain stem, 1" diameter quill with a 30-degree rise for a 22.2mm diameter bar. Used, $50.00/each

This stem is drilled so that it can also act as the cable housing stop for the front brake.

Side view. The exit hole forthe front brake wire can be seen.

From the other side.

From underneath

Top view. You can see the entrance hole for the brake cable and housing.

The chrome-plated quill, showing the minimum instertion mark and the quill diameter. 22.2mm translates to 1"

---

9cm alloy stem, 1" diameter quill with a 60-degree rise for a 25.4mm diameter bar. New, $30.00/each

Part# 31249

Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 8cm.

Side view

Here's the stem's other side

The top of the stem

The front and underside of the stem

---

10cm stem, 1" diameter quill with 25.4mm bar clamp diameter. Used, $30.00/each

Side view

Here's the other side of the stem.

Front view

And from the back.

---

10.5cm stem, 1" diameter quill with a 45-degree rise for a 25.4mm diameter bar. New, $25.00

Part# 31249

• This stem is made for a 1" steering tube
• Bar clamp diameter is 25.4mm

Nicely finished.

Top view

---

10.5cm, 1" diameter CroMoly quill stem with a 40-degree rise, 25.4mm bar clamp diameter. New, $30.00/each

Part# 31249

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 10cm.

This stem can also act as a front brake cable housing stop.

Here's the other side of the stem

Here the top and back of the stem

Front and underside.

---

11cm, 1" diameter CroMoly quill stem with a 40-degree rise, for a 25.4mm diameter bar. New, $30.00/each

Part# 31172

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 8cm.

Side view. This stem can also act as a front brake cable housing stop.

Here's the other side of the stem.

The back and top of the stem

Front and underside of the stem.

---

12cm 1" diameter quill stem with a 15-degree rise, for a 25.4mm diameter bar. Used, $25.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 6cm.

Side view. This stem has a front brake cable housing stop

Here's the other side of the stem

Back and top of the stem

Front and underside

---

12cm, 1" diameter CroMoly quill stem with a 40-degree rise, for a 25.4mm diameter handlebar. Used, $30.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 12cm.

Side view

Here's the other side of the stem

Front and underside of the stem

Back and top of the stem

---

12cm, 1" diameter quill stem with a 40-degree rise, for a 25.4mm diameter bar. Used, $25.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 11cm.

This stem has a front brake cable housing stop,

Here's the other side of the stem. If you need to get your bars higher, this stem should do the trick.

Front and underside of the stem.

Back and top of the stem

---

13.5cm Alloy Black 1" diameter quill stem with a 15-degree rise, for a 25.4mm diameter bar. Used, $25.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 5cm.

Side view

Here's the other side.

Back and top of the stem

Front and underside

---

13.5cm Japan-made 1" diameter quill stem with a 20-degree rise, 25.4mm diameter bar. Used, $30.00/each

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 6cm.

Side view. This stem can also act as a front brake cable housing stop.

Here's the other side of the stem.

Back and top of the stem

Front and underside.

---

15cm CroMoly stem, 1 1/8 diameter quill, with a 20-degree rise, for a 25.4mm diameter bar. New, $30.00/each

Part# 31171

• Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 6cm.

Side view

Here's the other side. You can see that the stem has a cable housing stop on the side of the extension and a cable exit hole near that back on the underside of the extension.

Here's the back and the top of the stem

And here's the front.

---

13cm alloy stem, 1 1/4" diameter quill, with a 20-degree rise, for a 25.4mm diameter bar. Used, $35.00/each

Actual rise: From the level of the quill's minimum insertion mark to the center of the bar is 5cm.

Side view

Here's the other side. You can see the minimum insertion line, labeled "MAX. HT".

Front view

From the top.