Components - Shimano tandem cranksets

On this page: 105 175mm/170mm triple crankset | 105 170mm/170mm triple crankset | 105 175mm front right arm | Deore XT-730 165mm Captains's Left Crank Arm | Deore XT-730 Tandem 170mm/170mm triple crankset | XT-730 38-tooth 110 BCD ring

We do not have an on-line shopping cart at this time. Please call us: (503) 480-2001 or email: sscycleworks@comcast.net

---

Shimano 105-1057 tandem triple crankset, 175mm/170mm arms, 30/42/53 rings. New, $500.00/set

Part# 61183

We have two sets

• Captain's crank arms are 175mm, stoker's are 170mm
• Chain rings are 30-42-53
• Bolt pattern is 130/74 bcd
• This FC-1057 crankset is based on the 105 crankset.
• Crank arms are forged and made for square-tapered bottom bracket spindles
• Chain rings are ramped and pinned
• Crankset is 8 and 9-speed compatible. We think 10-speed is possible. Give us a call.

For greater clarity and detail, there are four photos of this crankset:

New. With ramped and pinned chainrings.

The business side.

The timing cranks that are used to connect the captain to the stoker.

Backs of the timing cranks

---

Shimano 105-1057 tandem triple crankset, 170mm/170mm arms, 30/42/53 rings. New, $500.00/set

Part# 61182

We have one set.

• Captain's crank arms are 170mm, stoker's are 170mm
• Chain rings are 30-42-53
• Bolt pattern is 130/74 bcd
• This FC-1057 crankset is based on the 105 crankset.
• Crank arms are forged and made for square-tapered bottom bracket spindles
• Chain rings are ramped and pinned
• Crankset is 8 and 9-speed compatible. We think 10-speed is possible. Give us a call.

For greater clarity and detail, there are four photos of this crankset:

New, with ramped and pinned chainrings

Shimano has clearly devoted a lot of energy into making these chainrings shift well. Note all the ramps and pins.

The timing cranks that are used to connect the captain to the stoker.

And the backs of the timing cranks.

---

Shimano 105 Tandem right front 175mmm crank arm. New, $75.00/each

Part# 61186

• Shimano part# FC-1057
• We have ten in stock.

This is not just another left arm. It is specially made to accept a right pedal

Here's the back of the arm.

---

Deore XT-730 165mm Captains's right Crank Arm. Barely used. $100.00

• Uses JIS square-tapered spindle
• Produced late from the 1980s into the early 1990s

Lightly used. Note: It has right hand-threads, so it is not really suitable for use on a single ibke.

---

Deore XT-730 Tandem 170mm/170mm crankset. New. $600.00

Part# 61180

• Made for 110mm and 74mm BCD chainrings
• Uses JIS square-tapered spindle
• Produced late from the 1980s into the early 1990s

Captain's cranks, 170mm arms

Back of the captain's cranks.

Stoker's 170mm cranks. The right (drive side) is made for 110/74mm BCD rings. The drive rings are not included, but we have lots of rings in stock if you need them. Just give us a call or shoot us an email.

Back of the stoker's cranks

---

Deore XT 730 Tandem 38-tooth ring, 110 BCD. New, $75.00

New, and ready for your bike

Here's a close-up