Paul Components Bicycle Hubs

Paul Components Bicycle Hubs on this page: High-flange nutted 36-hole hubset

Parts for Paul Components bicycle hubs are posted here.

We do not have an on-line shopping cart at this time. Please call us: (503) 480-2001 or email: sscycleworks@comcast.net

---

Paul Components High Flange nutted 36-hole hubset. New, laced, but never ridden: Front | Rear

The company writes this about these hubs: “These hubs are machined from three inch round bars of 6061 aluminum, and the hub shells are put through four different machining processes before they go to finishing, an awesome testament to the high quality you expect from Paul components..

"This High Slotted-Flange hub uses a special extra strong aluminum axle with stainless knurled axle faces.  The wide flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.

"The axle is ground from 7075 aluminum, which has a great strength to weight ratio. The outer lock nut faces are made of knurled steel for a solid grip against dropouts. Two axles are available with 120mm or 130mm outer lock nut spacing. The ends of the axle are threaded to receive our stainless steel axle bolts. Hub Service Parts are available to convert between axle lengths.

"We use high-fill sealed bearings in the High Flange Rear, and they can be adjusted with our simple adjuster ring.
The chainline on the High Flange Rear is spaced to 44mm for the fixed cog, and 48mm for the freewheel.”

Paul Components High Flange nutted 36-hole front hub. New, laced, but never ridden, $150.00/each

The front hub.

End view

The other side of the hub.

Paul Components High Flange nutted 36-hole 130mm rear hub for fixed gear and/or freewheel. New, laced, but never ridden. $180.00/each

Double sided: the left for a freewheel, the right for a fixed gear.

End view of the fixed-gear side

And here's the freewheel side.