Specialized Bicycle Road Wheels

Specialized bicycle road wheels and wheels built with Specialized hubs on this page:

Wheelsets: Specialized 700C Saturae HC20 36-hole wheelset | Specialized wheelset with Shimano-compatible 10-speed hubs & 28 x 32-hole Alex rims

Front wheels: Specialized 36-hole cartridge-bearing hub/Mavic Module E2 rim

Rear wheels: Specialized 10-speed, 32-hole disc-brake 135mm hub/700c rim

We don't have an on-line shopping cart. If you see something that interests you or if you have a question, please call us at (503) 480-2001 or email: sscycleworks@comcast.net

1. All used wheels that we offer for sale have been overhauled. Some have been re-built with new spokes, bearings, cones, hubs or rims, according to their needs.
2. Quick-release new wheels will be provided with a skewer.
3. All wheels, new or used, have been trued, tensioned, and bearing tension adjusted 
4. Axle bearing tension performed.

---

Specialized 700C Saturae HC20 36-hole wheelset. Used, $1,000.00/set

• These rare OEM wheels came on a Specialized Allez SE bike of the mid-1980s. They are perfect for an Allez SE restoration project.
• They are in good condition with no hops or bends or signs of over-tensioned spokes. The front rim shows very little braking while the rear rims does show some
• Hubs are sealed-bearing cartridge Specialized hubs using sleeve nuts.
• Rear hub is 126mm
• Rims are hard-anodized 36-hole Specialized Saturae HC20.
• Wheelsmith 14-gauge spokes, built cross 3.
• Rear wheel has Velox rim strip.
• Wheelset weighs 2,140 grams
• Front wheel with quick-release is 1,040 grams
• Front wheel without quick-release is 960 grams
• Rear wheel with quick-release is 1,140 grams
• Rear wheel without quick-release is 1,020 grams

Here's the pair of wheels

The rim labels

Here's the front wheel.

The front wheel from another angle.

Here's a close-up

The front hub

Here's the other side of the front hub.

The rear wheel

Detail shot of the rear wheel

Close-up of the rear hub

The other side of the rear hub.

---

Specialized wheelset with Shimano compatible 10-speed hubs & 28 x 32-hole Alex rims. Lightly used, $150.00/set

• Lightly used wheels came from Specialized bicycle
• Hubs are Shimano 10-speed compatible
• 28-hole front hub, 32-hole rear hub
• Rims are Alex AT400.
• Wheels were completely serviced before being posted.

Here's the wheelset.

The rear wheel

Close-up of the rim of the rear wheel.

The rear hub. Very Johnny Cash: black hub, black skewer, black spokes & black rim.

The non-drive side of the rear hub.

The front wheel

Close-up of the rim of the front wheel

The front hub

The other side of the front hub

---

Front wheel built with Specialized 36-hole cartridge-bearing hub/Mavic Module E2 700c clincher rim. Used, $125.00/each

• This wheel was built with DT stainless steel spokes
• This wheel weighs 1,010 grams
• We have replacement dust caps for this hub posted here.

• This is a quality wheelbuild with a mirror spoke assembly.

Side view

Here's the wheel's Specialized hub.

Side view of the Specialized hub

The other side of the Specialized front hub.

The wheel's Mavic Module E2 rim

Looking in the Mavic Module E2 clincher rim at the valve hole.

---

Rear wheel built with Specialized 10-speed, 32-hole disc-brake 135mm hub/700c rim. Lightly used, $75.00/each

• This wheel is built with stainless steel spokes.
• This wheel weighs 1,250 grams.
• The rim is drilled for schrader valve, but we have presta-valve rim adapters if needed.
• This is a quality wheelbuild with a mirror spoke assembly.

Side view of the wheel, cassette body out.

Here's the Specialized cassette hub.

End view of the hub's drive side. Note the inside spokes are pointing in the same direction, as are the outside spokes because this wheel has a mirror spoke build.

The other side of the hub, showing the brake disc mount flange.

Here's the ETRTO rim specs. For the detail minded, that stands for European Tire and Rim Technical Organization

Looking in the rim at the valve hole.

---