Recumbent bike parts

Recumbent bicycle parts on this page:

Windwrap: Windwrap recumbent fairing
GreenSpeed: Fender hardware
TerraTrike: TerraTrike WizWheel Zoomer Elite Boom Clamp | TerraTrike WizWheels Idler Wheels | TerraTrike Spacer, 42mm I.D. x 25mm high
Vision: Recumbent Chain Length Adjuster
Windcheetah: 36-hole rear hub
Unknown makers: Female tie rod end, right-hand threads | Tie Rod End right hand threads, 5/16" x 24 | Tie Rod End right hand threads, 8 x 1.25 | Tie Rod End left hand threads, 5/16 x 24 | Tie Rod End left hand threads, 8 x 1.25

We don't have an on-line shopping cart. If you see something that interests you or if you have a question, please call us at (503) 480-2001 or email: sscycleworks@comcast.net

---

Windwrap RNS/WWRTX for RANS T-Bars Fairing. Used, $250.00/each

The fairing

Straight on view of the Windwrap fairing

The Windwrap logo on the fairing

Close-up of the bottom of the fairing where there are holes for moutning screws. As you can see, it has cracked here and in putting it on your own recumbent, you will need to get some large washers to reinforce and secure the fairing at this point.

Mounting hardware

It is American made.

Mounting hardware small parts are included.

It will come with fairing scratch remover and polish.

Page one of the mounting directions.

Mounting directions page two.

---

GreenSpeed Fender Hardware. New, $25.00/as pictured

---

TerraTrike WizWheel Zoomer Elite Boom Clamp, 6cm ID. New, $10.00/each

---

TerraTrike WizWheels Idler Wheels, 55mm OD. Used, $20.00/set

The pair of idler wheels.

Another view

---

TerraTrike Spacer, 42mm I.D. x 25mm high. New, $20.00/each

---

Vision Recumbent Chain Length Adjuster, (ID40). New, $50.00/each

Part# 86950

View one.

Rotated 90 degrees

Close-up of the tensioning wheels.

---

WindCheatah 36-hole Rear Hub. Used, $75.00/each

Here's the hub.

End view

And from the other side.

A slight disassembly...

So that this drawing of the dimensions makes sense.

---

Tie rod end, female, right-hand threads, 5/16" x 24, 8mm ID. Used, $10.00/each

We have two in stock.

---

Tie Rod End right hand threads, 5/16" x 24, 8mm ID. New, $10.00/each

We have four in stock.

---

Tie Rod End right hand threads, 8 x 1.25, 8mm ID. New, $10.00/each

We have four in stock.

---

Tie Rod End left hand threads, 5/16 x 24, 8mm ID. New, $10.00/each

We have four in stock.

---

Tie Rod End left hand threads, 8 x 1.25, 8mm ID. New, $10.00/each

We have four in stock.