Origin8 cranksets

Origin8 single-speed cranksets on this page: White 165mm | Uno 170mm | Track 175mm

We do not have an on-line shopping cart at this time. Please call us: (503) 480-2001 or email: sscycleworks@comcast.net

Origin8 is a well-regarded American company that has products made to its specifications.

---

Origin8 White 165mm, 46-tooth, 130-bcd single-speed crankset for 1/8” chain. New, $90.00/each

Part #61255

• This crankset is new, but has some shop wear.
• This crankset uses a 103mm bottom bracket.

New, with its box.

Here's just the drive side.

Back of the drive side

It is a 165mm crankset.

The left arm

Back of the left arm. The crankset is manufactured by respected maker Lasco.

Close-up on some shop wear on the left arm.

And some wear at the top of the left arm.

---

Origin8 Uno 170mm, 46-tooth x 3/32" single-speed crankset. Used, $75.00

Part# 61250

• We have two almost identical lightly used cranksets.
• Here's a perfect crankset for building up that fixie. Crank arms are 170 with a 46-tooth chainring.
• The ring is 3/32", normal road size. The arms are square taper for a traditional bottom bracket spindle.
• Bolt pattern is 110.
• The arms will accept double or triple chainring set-ups as well.

The ring has very little wear. The arm does have scratches.

You can see the drive arm is drilled and tapped for a small inner ring.

---

OR8 Track single-speed 175mm crankset with 44-tooth, 3/32" chainring. Used, $80.00/each

• This crankset uses a 103mm bottom bracket.
• This crankset takes 130BCD chainrings.
• It can be made into a double-crankset.

Here's the crankset.

Here's a good view of just the drive side.

The back of the drive side

Close-up

The left crank arm.

Back of the left arm